| About |
|---|
| Filler reinforced, Good abrasion resist, Dimensional Precision&& |
| Product Description | |
|---|---|
| Supplier | Idemitsu |
| Generic | PC+AS(SAN) |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Flame Characteristics,Good wear resistance,V-1,5VB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.43 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 260℃，2.16 kg | 8.00 | cm³/10min | ISO 1133 |
| Spiral flow length | 21.0 | cm | Internal Method |
| Shrinkage rate | Internal Method | ||
| TD：2.0 mm | 0.20 | % | Internal Method |
| MD：2.0 mm | 0.17 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 74.0 | MPa | ISO 527-2 |
| Nominal tensile fracture strain | 2.0 | % | ISO 527-2 |
| Bending modulus | 7500 | MPa | ISO 178 |
| bending strength | 106 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 4.0 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 105 | ℃ | ISO 75-2/A |
| Linear coefficient of thermal expansion | |||
| TD | 4.4E-5 | 1/℃ | ISO 11359-2 |
| MD | 2.7E-5 | 1/℃ | ISO 11359-2 |
| Relative temperature index | |||
| Electrical performance | 50.0 | ℃ | UL 746 |
| Strength mechanical performance | 50.0 | ℃ | UL 746 |
| Impact mechanical performance | 50.0 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.50 mm, black | V-1 | UL 94 | |
| 2.00 mm, black | 5VB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| ISO Shortname | >PC+AS-(TD+PD)30-FR(40)< |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 to 100 | °C | |
| Drying time | 5.0 to 8.0 | hr | |
| Barrel rear temperature | 270 to 280 | °C | |
| Barrel middle temperature | 270 to 280 | °C | |
| Barrel front temperature | 270 to 280 | °C | |
| Mold temperature | 40 to 70 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |