TATREN® IM 6 56

About
TATREN IM 6 56 is impact copolymer characterised by excellent long term heat stability. Its high stiffness is well balanced by very good impact resistance. It contains antistatic agent. Applications TATREN IM 6 56 is intended especially for injection moulding of car parts, auto battery cases mainly. This grade is suitable also for injection moulding of transport and storage containers, water tanks, household and garden articles, wall fasteners, toys, household appliances and other technical items where good impact/stiffness balance supported by long term heat stability is required. TATREN IM 6 56 is suitable for compounding as well. TATREN IM 6 56 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TATREN IM 6 56 is impact copolymer characterised by excellent long term heat stability. Its high stiffness is well balanced by very good impact resistance. It contains antistatic agent. Applications TATREN IM 6 56 is intended especially for injection moulding of car parts, auto battery cases mainly. This grade is suitable also for injection moulding of transport and storage containers, water tanks, household and garden articles, wall fasteners, toys, household appliances and other technical items where good impact/stiffness balance supported by long term heat stability is required. TATREN IM 6 56 is suitable for compounding as well. TATREN IM 6 56 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Renewable resources,Food contact compliance,Antistatic property,Heat Stabilized
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	6.5	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/A
-20 ℃, injection molding	4.0	kJ/m²	ISO 180-A
23 ℃, injection molding	9.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	92.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1600	MPa	ISO 527-2
tensile strength
Yield, injection molding	27.5	MPa	ISO 527-2
Tensile strain
Yield, injection molding	6.0	%	ISO 527-2
Bending modulus
injection molding	1500	MPa	ISO 178
Rockwell hardness
R-level	88		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.