TATREN® IM 75 81

About
TATREN IM 75 81 is reactor impact copolymer of good processing stability and excellent flowability. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mould release in the injection moulding process. TATREN IM 75 81 is characterised by excellent organoleptic properties (low taste and odour), high stiffness/impact balance and good flow. TATREN IM 75 81 is intended especially for high speed thin wall injection moulding of products where good impact resistance is required and for products of complicated shapes. Typical end products are different household and garden articles like bowls, pails, storage boxes, trays, caps, closures, boxes for food packaging, toys etc. This grade can be used in mixtures with TATREN homopolymer grades. TATREN IM 75 81 is well suited for LFT technology to produce sound insulation car parts by compression moulding. This grade can be used for compounding as well. TATREN IM 75 81 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TATREN IM 75 81 is reactor impact copolymer of good processing stability and excellent flowability. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mould release in the injection moulding process. TATREN IM 75 81 is characterised by excellent organoleptic properties (low taste and odour), high stiffness/impact balance and good flow. TATREN IM 75 81 is intended especially for high speed thin wall injection moulding of products where good impact resistance is required and for products of complicated shapes. Typical end products are different household and garden articles like bowls, pails, storage boxes, trays, caps, closures, boxes for food packaging, toys etc. This grade can be used in mixtures with TATREN homopolymer grades. TATREN IM 75 81 is well suited for LFT technology to produce sound insulation car parts by compression moulding. This grade can be used for compounding as well. TATREN IM 75 81 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Good Dimensional Stability,High liquidity,Renewable resources,Nucleation,Quick molding cycle,Good stripping performance,Food contact compliance,Good sensory characteristics.,Antistatic property,Impact copolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	75	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/A
-20 ℃, injection molding	3.5	kJ/m²	ISO 180-A
23 ℃, injection molding	6.5	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	105	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1500	MPa	ISO 527-2
tensile strength
Yield, injection molding	23.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	4.0	%	ISO 527-2
Bending modulus
injection molding	1450	MPa	ISO 178
Rockwell hardness
R-level	82		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.