TATREN® RM 60 57

About
TATREN RM 60 57 is a controlled rheology random copolymer of excellent processing stability and high fluidity. It contains unique and very effective clarifying agent and antistatic agent. TATREN RM 60 57 is characterised by good transparency, high gloss and good organoleptic properties. Applications TATREN RM 60 57 is intended for thin wall injection moulding of products where good clarity and low haze is required – video and DVD boxes, food packages, cups, closures, household articles etc. Thanks to used additive package it can be processed at significantly lower temperatures and gives potential for cycle time reduction. TATREN RM 60 57 is suitable for food contact. The product complies with Food Contact Regulations.&&

About

TATREN RM 60 57 is a controlled rheology random copolymer of excellent processing stability and high fluidity. It contains unique and very effective clarifying agent and antistatic agent. TATREN RM 60 57 is characterised by good transparency, high gloss and good organoleptic properties. Applications TATREN RM 60 57 is intended for thin wall injection moulding of products where good clarity and low haze is required – video and DVD boxes, food packages, cups, closures, household articles etc. Thanks to used additive package it can be processed at significantly lower temperatures and gives potential for cycle time reduction. TATREN RM 60 57 is suitable for food contact. The product complies with Food Contact Regulations.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,Food contact compliance,Good sensory characteristics.,Random copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	60	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	4.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	80.0	℃	ISO 75-2/B

optical performance	Nominal value	Unit	Test method
Haze	11	%	ISO 14782

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	1200	MPa	ISO 527-2
tensile strength
Yield, injection molding	29.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	11	%	ISO 527-2
Bending modulus
injection molding	1100	MPa	ISO 178
Rockwell hardness
R-level	90		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.