TECACOMP® PA46 TF30 natural 3148

About
TECACOMP® PA46 TF30 natural 3148 is a Polyamide 46 (Nylon 46) product filled with 30% ptfe fiber. It can be processed by injection molding and is available in Europe.&&

Product Description
Supplier	Ensinger
Generic	PA 46
Material Status	Commercial: Active
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³
Apparent density	0.77	g/cm³	ISO 60
Viscosity (H2SO4 (sulfuric acid))	185	cm³/g	ISO 307

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2300	MPa	ISO 527-2/50
tensile strength	65.0	MPa	ISO 527-2/50
Tensile strain
fracture	8.0	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	45	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	75.0	℃	DIN 53765
Melting temperature	295	℃	DIN 53765
Operating temperature
long-term	130	℃
short-term	220	℃

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 8.0	hr
Recommended maximum moisture content	0.050	%
Processing (melt) temperature	280 to 320	°C
Mold temperature	80 to 150	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.