TECACOMP® PEEK 450 CF30 black 3198

About
TECACOMP® PEEK 450 CF30 black 3198 is a Polyetheretherketone (PEEK) product filled with 30% carbon fiber. It can be processed by injection molding and is available in Europe.&&

Product Description
Supplier	Ensinger
Generic	PEEK
Material Status	Commercial: Active
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.39	g/cm³
Apparent density	0.67	g/cm³	ISO 60

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	17500	MPa	ISO 527-2/50
tensile strength	190	MPa	ISO 527-2/50
Tensile strain
fracture	2.0	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	45	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	143	℃	DIN 53765
Melting temperature	343	℃	DIN 53765
Operating temperature
long-term	260	℃
short-term	300	℃

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	140 to 160	°C
Drying time	3.0 to 4.0	hr
Recommended maximum moisture content	0.020	%
Processing (melt) temperature	360 to 400	°C
Mold temperature	160 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.