TECAMID™ 66 GF30

About
TECAMID® 6/6 GF30 is a 30% glass-fiber reinforced nylon 6/6 material whose important properties include high tensile and flexural strength, stiffness, excellent heat deflection temperature, and superior abrasion and wear resistance. While all TECAMID® materials have high mechanical strength and superior resistance to wear and organic chemicals, TECAMID® 6/6 GF30 has more than double the strength and stiffness of unreinforced nylons and a heat deflection temperature which approaches its melting point. TECAMID® 6/6 GF30 has an excellent balance of properties which make it an ideal material for metal replacement in applications such as automotive parts, industrial valves, railway tie insulators, and other industry uses whose design requirements include high strength, toughness, and weight reduction. Superior organic chemical resistance High heat deflection temperature Excellent wear resistance Very good fatigue endurance Superior creep resistance&&

About

TECAMID® 6/6 GF30 is a 30% glass-fiber reinforced nylon 6/6 material whose important properties include high tensile and flexural strength, stiffness, excellent heat deflection temperature, and superior abrasion and wear resistance. While all TECAMID® materials have high mechanical strength and superior resistance to wear and organic chemicals, TECAMID® 6/6 GF30 has more than double the strength and stiffness of unreinforced nylons and a heat deflection temperature which approaches its melting point. TECAMID® 6/6 GF30 has an excellent balance of properties which make it an ideal material for metal replacement in applications such as automotive parts, industrial valves, railway tie insulators, and other industry uses whose design requirements include high strength, toughness, and weight reduction. Superior organic chemical resistance High heat deflection temperature Excellent wear resistance Very good fatigue endurance Superior creep resistance&&

Product Description
Supplier	Ensinger
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Good Tensile Strength,Good wear resistance,Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.36	g/cm³	ASTM D792
Water absorption rate
23℃，24hr	0.25	%
Saturation, 23 ℃	0.30	%

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	69	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Melting temperature	259	℃
Linear coefficient of thermal expansion
MD	4.9E-5	1/℃	ASTM D696
specific heat	1260	J/kg/℃	ASTM C351
Thermal conductivity coefficient	0.39	W/m/K	ASTM C177
Operating temperature
Intermittent	170	℃
long-term	110	℃

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+14	ohms	ASTM D257
Volume resistivity	1.0E+14	ohms·cm	ASTM D257

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	88		ASTM D785
Tensile modulus
23℃	5520	MPa	ASTM D638
tensile strength
Yield, 23 ℃	93.1	MPa
Fracture, 23 ℃	93.1	MPa
Tensile strain
Yield, 23 ℃	10	%
Fracture, 23 ℃	10	%
Bending modulus
23℃	4830	MPa	ASTM D790
bending strength
23℃	135	MPa	ASTM D790
Compression modulus	2620	MPa	ASTM D695
compressive strength
10% strain, 23 ℃	117	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.