TECANYL® MT - SOLIAO

About
TECANYL™ MT is a new family of autoclavable materials developed for medical device applications. The material offers the desired performance properties of PPSU based resins with the machining ease and tool friendliness of acetal or POM. This allows part designers to take advantage of lower manufacturing costs by increasing output rates, and reducing tool wear, all without sacrificing part performance. TECANYL™ MT and TECANYL™ MT XRO™ shapes are all ISO 10993 tested to support their use in instrumentation that is intended to come in contact with blood and tissue for a period of not more than 24 hours. Ensinger can also provide TECANYL™ MT grades in finished injection molded parts for high volume applications. TECANYL™ MT exhibits a broad range of outstanding properties for applications in medical devices where exposure to extreme heat and hygienic measures are demanded. Excellent wear properties, ease of quality machining and availability in a wide range of colors contribute to its desirability in medical devices. Excellent autoclave performance comparable to higher temperature materials Easily machined, producing high quality surface No black speck generation as in sulfone polymers Lower manufacturing costs ISO 10993 Tested&&

About

TECANYL™ MT is a new family of autoclavable materials developed for medical device applications. The material offers the desired performance properties of PPSU based resins with the machining ease and tool friendliness of acetal or POM. This allows part designers to take advantage of lower manufacturing costs by increasing output rates, and reducing tool wear, all without sacrificing part performance. TECANYL™ MT and TECANYL™ MT XRO™ shapes are all ISO 10993 tested to support their use in instrumentation that is intended to come in contact with blood and tissue for a period of not more than 24 hours. Ensinger can also provide TECANYL™ MT grades in finished injection molded parts for high volume applications. TECANYL™ MT exhibits a broad range of outstanding properties for applications in medical devices where exposure to extreme heat and hygienic measures are demanded. Excellent wear properties, ease of quality machining and availability in a wide range of colors contribute to its desirability in medical devices. Excellent autoclave performance comparable to higher temperature materials Easily machined, producing high quality surface No black speck generation as in sulfone polymers Lower manufacturing costs ISO 10993 Tested&&

Product Description
Supplier	Ensinger
Generic	PPO(PPE)
Material Status	Commercial: Active
Features	Good surface appearance,Machinable,Good wear resistance,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
—	1.08	g/cm³	ASTM D792
—	0.830	g/cm³	ISO 1183
Water absorption rate
Equilibrium, 23 ℃	0.23	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	3250	MPa	ASTM D638
tensile strength
Fracture, 23 ℃	67.6	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	16	%	ASTM D638
Bending modulus
23℃	2540	MPa	ASTM D790
bending strength
23℃	101	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	140	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	147	℃	ASTM D648
Linear coefficient of thermal expansion
MD：4~38℃	8.7E-5	1/℃	ASTM E831

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.