| About |
|---|
| metal detectable x-ray detectable&& |
| Product Description | |
|---|---|
| Supplier | Ensinger |
| Generic | PEEK |
| Material Status | Commercial: Active |
| Features | Metal Detectable |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.74 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 42 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 340 | ℃ |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 101 | ASTM D785 | |
| Tensile modulus | |||
| 23℃ | 5320 | MPa | ASTM D638 |
| tensile strength | |||
| Yield, 23 ℃ | 87.9 | MPa | |
| Fracture, 23 ℃ | 87.9 | MPa | |
| Tensile strain | |||
| Yield, 23 ℃ | 3.4 | % | |
| Fracture, 23 ℃ | 4.1 | % | |
| Bending modulus | |||
| 23℃ | 5020 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 146 | MPa | ASTM D790 |
| Compression modulus | 3700 | MPa | ASTM D695 |
| compressive strength | |||
| 10% strain, 23 ℃ | 146 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |