TECAPEEK® unfilled PEEK

About
TECAPEEK PEEK material (chemically known as polyetheretherketone) is manufactured by Ensinger in standard stock shapes for machining, and is extruded in sheet, rod and tube using Victrex® PEEK polymer. Well known for its high temperature resistance, PEEK is a unique semi-crystalline, engineering thermoplastic that also offers excellent chemical compatibility. Parts manufactured from high temperature plastic PEEK polymer can operate at temperatures up to 260°C (480°F) and has a melting point around 341°C (646°F). PEEK plastic is often used in hot water or steam environments while maintaining physical properties such as flexural and tensile strength on a high level. Polyetheretherketone is often viewed as one of the engineering thermoplastics that tends to command a high price, however experienced users have come to realize the added value that PEEK materials bring, by offering the possibility of manufacturing parts that are lighter, stronger and able to survive longer in harsh environments. TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields. Excellent flexural, impact, and tensile characteristics Very high continuous working temperature Very high heat deflection temperature Exceptional chemical resistance A superior dielectric at high temperatures and frequencies Good radiation resistance Outstanding wear and abrasion resistance Low smoke and toxic gas emissions Excellent hydrolysis resistance&&

About

TECAPEEK PEEK material (chemically known as polyetheretherketone) is manufactured by Ensinger in standard stock shapes for machining, and is extruded in sheet, rod and tube using Victrex® PEEK polymer. Well known for its high temperature resistance, PEEK is a unique semi-crystalline, engineering thermoplastic that also offers excellent chemical compatibility. Parts manufactured from high temperature plastic PEEK polymer can operate at temperatures up to 260°C (480°F) and has a melting point around 341°C (646°F). PEEK plastic is often used in hot water or steam environments while maintaining physical properties such as flexural and tensile strength on a high level. Polyetheretherketone is often viewed as one of the engineering thermoplastics that tends to command a high price, however experienced users have come to realize the added value that PEEK materials bring, by offering the possibility of manufacturing parts that are lighter, stronger and able to survive longer in harsh environments. TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields. Excellent flexural, impact, and tensile characteristics Very high continuous working temperature Very high heat deflection temperature Exceptional chemical resistance A superior dielectric at high temperatures and frequencies Good radiation resistance Outstanding wear and abrasion resistance Low smoke and toxic gas emissions Excellent hydrolysis resistance&&

Product Description
Supplier	Ensinger
Generic	PEEK
Material Status	Commercial: Active
Features	High impact resistance,Low smoke,Hydrolysis stability,Gamma radiation,Food contact compliance,High Heat Resistance,Hypocrystalline,Good wear resistance,Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³	ASTM D792
Water absorption rate
23℃，24hr	0.020	%
Saturation, 23 ℃	0.45	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	51	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	160	℃	ASTM D648
Melting temperature	334	℃
Linear coefficient of thermal expansion
MD	4.5E-5	1/℃	ASTM D696
Thermal conductivity coefficient	0.29	W/m/K	ASTM C177
Operating temperature
Intermittent	300	℃
long-term	249	℃

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+16	ohms	ASTM D257
Volume resistivity
23℃	4.9E+16	ohms·cm	ASTM D257
Dielectric strength	25	kV/mm	ASTM D149
Dielectric constant
23 ℃，60 Hz	2.80		ASTM D150
Dissipation factor
23℃，60 Hz	3.0E-3		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Supplementary information	Nominal value	Unit	Test method
Pressure limiting speed	69000	psi·fpm

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	99		ASTM D785
Tensile modulus
23℃	4480	MPa	ASTM D638
tensile strength
Yield, 23 ℃	110	MPa
Fracture, 23 ℃	110	MPa
Tensile strain
Yield, 23 ℃	4.9	%
Fracture, 23 ℃	40	%
Bending modulus
23℃	4140	MPa	ASTM D790
bending strength
23℃	179	MPa	ASTM D790
Compression modulus	3400	MPa	ASTM D695
compressive strength
10% strain, 23 ℃	121	MPa	ASTM D695
friction coefficient
dynamic	0.20		ASTM D1894
Wear factor	400	10^-8 mm³/N·m	ASTM D3702

Notes
1. Typical properties: these are not to be construed as specifications.
2. 40 PSI, 50 FPM
3. 50% RH
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.