| About |
|---|
| TECATOR is a high performance melt processable polyamide-imide, that maintains its excellent mechanical and wear properties in temperature environments exceeding 500°F. TECATOR TI5013, is a high strength structural grade featuring good electrical properties and strength, making it ideal for demanding applications at a broad range of temperatures. TECATOR™(PAI) typical applications: Pump parts, valve seats, piston rings, seal rings, engine transmission parts and bearing cages. For the semiconductor industry it is used for ?burn in? test sockets, nests, chassis and other applications such as welding nozzle tips.&& |
| Product Description | |
|---|---|
| Supplier | Ensinger |
| Generic | PAI |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Weather resistance is good,Good Electrical Properties,Gamma radiation,Good wear resistance,Solvent resistance,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.41 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 23℃，24hr | 0.30 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 120 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 278 | ℃ | ASTM D648 |
| Continuous use temperature | 260 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 3.0E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.0E+15 | ohms | ASTM D257 |
| Dielectric strength | 24 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 1 MHz | 3.90 | ASTM D150 | |
| 20.0 GHz | 3.20 | ASTM D150 | |
| 30.0 GHz | 3.70 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 1 MHz | 9.0E-3 | ASTM D150 | |
| 20 GHz | 9.0E-3 | ASTM D150 | |
| 30 GHz | 5.0E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 119 | ASTM D785 | |
| tensile strength | |||
| Fracture, 23 ℃ | 145 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 15 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 4900 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 228 | MPa | ASTM D790 |
| compressive strength | |||
| 1% strain | 207 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |