TECHNO ABS 611L

About
TECHNO ABS 611L is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by extrusion and is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: low gloss.&&

Product Description
Supplier	Techno
Generic	ABS
Material Status	Commercial: Active
Features	Low Gloss
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Melt Flow Rate
220℃，10.0kg	4.3	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	17	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	80.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	102		ISO 2039-2
tensile strength
yield	42.0	MPa	ISO 527-2
Bending modulus	2250	MPa	ISO 178
bending strength	66.0	MPa	ISO 178

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 5.0	hr
Barrel 1 zone temperature	170 to 240	°C
Barrel 2 zone temperature	170 to 240	°C
Barrel 3 zone temperature	170 to 240	°C
Barrel 4 zone temperature	170 to 240	°C
Barrel 5 zone temperature	170 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.