TECHNO MUH GF5202

About
TECHNO MUH GF5202 is an Acrylonitrile Butadiene Styrene (ABS) product filled with glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.&&

Product Description
Supplier	Techno
Generic	ABS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ISO 1183
Melt Flow Rate
240℃，10.0kg	13	g/10min	ISO 1133
Shrinkage rate	0.20 to 0.40	%	ISO 294-4

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	5.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	115	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	116		ISO 2039-2
tensile strength
yield	88.0	MPa	ISO 527-2
Bending modulus	5890	MPa	ISO 178
bending strength	119	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	100 to 110	°C
Drying time	2.0 to 5.0	hr
Barrel rear temperature	190 to 260	°C
Barrel middle temperature	190 to 260	°C
Barrel front temperature	190 to 260	°C
Mold temperature	50 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.