TECHNO MUH W7403

About
TECHNO MUH W7403 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Heat Resistant Impact Resistant&&

Product Description
Supplier	Techno
Generic	ABS
Material Status	Commercial: Active
Features	High Heat Resistance
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Melt Flow Rate
240℃，10.0kg	6.0	g/10min	ISO 1133
Shrinkage rate	0.60 to 0.90	%	ISO 294-4

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	16	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	99		ISO 2039-2
tensile strength
yield	40.0	MPa	ISO 527-2
Bending modulus	1850	MPa	ISO 178
bending strength	61.0	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90 to 100	°C
Drying time	2.0 to 5.0	hr
Barrel rear temperature	220 to 270	°C
Barrel middle temperature	220 to 270	°C
Barrel front temperature	220 to 270	°C
Mold temperature	40 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.