TechnoFiber PP LGF 30-10-01 L HI UV satinschwarz (89051)

About
PP long glass fiber 30%, high impact strength Applications: injection molding, automotive & electronics&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12	g/cm³	ISO 1183
Ash Content
625℃	30	%	ISO 3451

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7000	MPa	ISO 527-2
tensile strength
yield	98.0	MPa	ISO 527-2
Tensile strain
yield	2.6	%	ISO 527-2
Bending modulus	7200	MPa	ISO 178
bending strength	140	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-30℃	20	kJ/m²
23℃	19	kJ/m²
Charpy Unnotch Impact strength
-30℃	60	kJ/m²
23℃	55	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	160	℃	ISO 75-2/B

Supplementary information	Nominal value	Unit	Test method
Fiberglass length	1.00	cm	Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.15	%
Hopper temperature	20 to 50	°C
Barrel rear temperature	210 to 245	°C
Barrel middle temperature	215 to 260	°C
Barrel front temperature	230 to 270	°C
Nozzle temperature	240 to 280	°C
Processing (melt) temperature	210 to 280	°C
Mold temperature	30 to 60	°C
Injection pressure	50.0 to 130	MPa
Hold pressure	30.0 to 50.0	MPa
Back pressure	0.00 to 1.50	MPa
Screw speed	40 to 60	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.