TechnoForce PA6 CF 15 1 C H S (88585)

About
PA6 carbon fiber 15%, heat stabilized, good surface quality Applications: injection molding, automotive&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Good surface appearance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ISO 1183
Ash Content
625℃	15	%	ISO 3451

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	9300	MPa	ISO 527-2
tensile strength
yield	120	MPa	ISO 527-2
Tensile strain
yield	3.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	3.8	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	40	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	210	℃	ISO 75-2/B

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.060	%
Hopper temperature	20 to 50	°C
Barrel rear temperature	250	°C
Barrel middle temperature	250 to 280	°C
Barrel front temperature	250 to 280	°C
Nozzle temperature	250 to 280	°C
Processing (melt) temperature	250 to 280	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.