| About |
|---|
| TECHNOMELT PA 6208 BLACK (e) thermoplastic, hot melt adhesive is designed for molding compound applications. This material adheres well to a variety of substrates including metals and ABS.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Softening temperature | 155 | ℃ | ASTM E28 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent viscosity of melt | |||
| 210℃ | 3200 | mPa·s |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| working temperature | -40 to 100 | ℃ | |
| Low temperature toughness | -40 | ℃ | ASTM D3111 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 82 | ISO 868 | |
| tensile strength | |||
| yield | 3.30 | MPa | |
| fracture | 3.60 | MPa | |
| Tensile strain | |||
| fracture | 450 | % | ISO 527-2/5/50 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |