Technomelt® PA 7846 BLACK™

About
TECHNOMELT® PA 7846 BLACK™ is a moldable polyamide hotmelt that can be used where strength and hardness are needed, such as in memory sticks and computer connectors&&

Product Description
Supplier	Henkel
Generic	PA Not specified
Material Status	Commercial: Active
Features	Good Rigidity,Good Hardness
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-30.0	℃	DSC
Softening temperature	170 to 180	℃	ASTM E28

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Supplementary information	Nominal value	Unit	Test method
Low temperature toughness	-35	℃	ASTM D3111

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 15 seconds	92		ISO 868
tensile strength
yield	5.00	MPa
fracture	9.00	MPa
Tensile strain
fracture	650	%	ISO 527-2/5/50

PHYSICAL	Nominal value	Unit	Test method
Density
20℃	0.980	g/cm³	ISO 1183
Apparent viscosity of melt
230℃	3000	mPa·s
225℃	3000 to 5500	mPa·s
220℃	4500	mPa·s
210℃	6500	mPa·s

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.