| About |
|---|
| TECHNOMELT® PA 7848 BLACK™ is used for molding applications. The product shows an improved UV stability and is especially suitable for outdoor applications.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Glass transition temperature | -30.0 | ℃ | DSC |
| Softening temperature | 170 to 180 | ℃ | ASTM E28 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature toughness | -30 | ℃ | ASTM D3111 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 93 | ISO 868 | |
| tensile strength | |||
| yield | 7.00 | MPa | |
| fracture | 9.00 | MPa | |
| Tensile strain | |||
| fracture | 550 | % | ISO 527-2/5/50 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | |||
| 20℃ | 0.980 | g/cm³ | ISO 1183 |
| Apparent viscosity of melt | |||
| 240℃ | 3100 | mPa·s | |
| 230℃ | 4100 | mPa·s | |
| 225℃ | 3000 to 5500 | mPa·s | |
| 220℃ | 5400 | mPa·s | |
| 210℃ | 7300 | mPa·s | |
| 200℃ | 10000 | mPa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |