| About |
|---|
| TECHNOMELT® PA 7873™ is a moldable polyamide with good adhesion for higher temperature applications, such as automotive underhoods.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Glass transition temperature | -45.0 | ℃ | DSC |
| Softening temperature | 182 to 192 | ℃ | ASTM E28 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature toughness | -40 | ℃ | ASTM D3111 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 90 | ISO 868 | |
| tensile strength | |||
| yield | 4.90 | MPa | |
| fracture | 5.50 | MPa | |
| Tensile strain | |||
| fracture | 400 | % | ISO 527-2/5/50 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | |||
| 20℃ | 0.980 | g/cm³ | ISO 1183 |
| Apparent viscosity of melt | |||
| 230℃ | 1800 | mPa·s | |
| 220℃ | 2500 | mPa·s | |
| 210℃ | 2800 to 4000 | mPa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |