TECHNYL® A 218 V40 NATURAL

About
TECHNYL® A 218 V40 NATURAL is a polyamide PA66, reinforced with 40% of glass fibre, heat stabilised for injection moulding. This grade offers an excellent combination between thermal and mechanical properties.&&

Product Description
Supplier	DOMO
Generic	PA66
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	Europe,Africa & Middle East
Process Methods	Injection Molding

Technical Data

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80.0	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	260 to 280	°C
Temperature in the middle of the barrel	270 to 300	°C
Front temperature of material barrel	280 to 310	°C
Mold temperature	60.0 to 90.0	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.