| About |
|---|
| TECHNYL® A 548B2 V15 Black 23N is a polyamide 6.6, reinforced with 15% of glass fibre, heat stabilized, impact modified, for blow moulding. This grade offers an excellent long term Heat resistance and is suitable to work in environments characterized by a very high temperature. It has been also specially designed to be perfectly suitable for blow moulding processing.&& |
| Product Description | |
|---|---|
| Supplier | DOMO |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Good melt strength,High impact resistance,High Heat Resistance,Heat Stabilized,High Viscosity,Good heat aging resistance |
| Availabilitys | Europe,Asia Pacific,Africa & Middle East |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Recommended maximum moisture content | 0.080 | % | |
| Temperature of material cylinder zone 1 | 260 to 280 | °C | |
| Temperature of material cylinder zone 2 | 270 to 290 | °C | |
| Joint temperature | 275 to 295 | °C | |
| Mouth temperature | 280 to 300 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |