TECHNYL® B 50H1 NATURAL L

About
TECHNYL® B 50H1 Natural L is an unreinforced copolyamide 6.6/6 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, UL94 V0 at 0.4mm, offers excellent filling qualities together with good stiffness.&&

Product Description
Supplier	DOMO
Generic	PA66/6
Material Status	Commercial: Active
Features	V-0
Availabilitys	Latin America,Europe,North America,Asia Pacific,Africa & Middle East
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.16	g/cm³	ISO 1183/A
Water absorption rate
Equilibrium, 23 ℃, 50% RH	3.1	%	ISO 62
23℃，24hr	1.1	%	ISO 62
Weathering resistance	f1		UL 746C

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	3750	MPa	ISO 527-2/1A
tensile strength
Fracture, 23 ℃	70.0	MPa	ISO 527-2/1A
Yield, 23 ℃	80.0	MPa	ISO 527-2/1A
Yield, 23 ℃	85.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	12	%	ISO 527-2
Fracture, 23 ℃	15	%	ASTM D638
Yield, 23 ℃	4.0	%	ISO 527-2
Bending modulus
23℃	3700	MPa	ISO 178
23℃	3800	MPa	ASTM D790
bending strength
23℃	130	MPa	ISO 178
23℃	125	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	3.0	kJ/m²	ISO 179/1eA
23℃	3.5	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-30℃	80	kJ/m²	ISO 179/1eU
23℃	70	kJ/m²	ISO 179/1eU
Impact strength of cantilever beam notch
23℃	5.0	kJ/m²	ISO 180
23℃	50	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	85.0	℃	ASTM D648
1.8 MPa, unannealed	85.0	℃	ISO 75-2/Af
Melting temperature	242	℃	ISO 11357-3

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+15	ohms	IEC 60093
Volume resistivity	1.0E+15	ohms·cm	IEC 60093
Dielectric strength
0.8 mm	33	kV/mm	IEC 60243-1
Relative permittivity	3.60		IEC 60250
Dissipation factor	0.020		IEC 60250
Compared to the leakage tracing index
Solution A	600	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level			UL 94
0.40 mm	V-0		UL 94
0.80 mm	V-0		UL 94
1.60 mm	V-0		UL 94
3.20 mm	V-0		UL 94
Glowing wire flammability index			IEC 60695-2-12
0.80 mm	960	℃	IEC 60695-2-12
1.6 mm	960	℃	IEC 60695-2-12
3.2 mm	960	℃	IEC 60695-2-12
Igniting temperature of the hot wire
1.6 mm	650	℃	IEC 60695-2-13
Extreme oxygen index	33	%	ISO 4589-2
French Fire Index	F2		NF F16-101
French Smoke Index	I2		NF F16-101

Supplementary information	Nominal value	Test method
European Railway Certification		EN 45545-2
R22	HL2	EN 45545-2
R23	HL3	EN 45545-2

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	245 to 250	°C
Temperature in the middle of the barrel	250 to 255	°C
Front temperature of material barrel	250 to 260	°C
Mold temperature	60 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.