| About |
|---|
| Product Description | |
|---|---|
| Supplier | DOMO |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Heat Stabilized,Ductility,High Viscosity |
| Availabilitys | Europe,Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 1830 | MPa | ISO 527-2/1A |
| tensile strength | ISO 527-2/1A | ||
| yield | 46.0 | MPa | |
| fracture | 41.0 | MPa | |
| Tensile strain | ISO 527-2/1A | ||
| yield | 5.0 | % | |
| fracture | 65 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| — | 110 | kJ/m² | |
| -30℃ | 90 | kJ/m² | |
| 0℃ | 100 | kJ/m² |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| drying temperature | 80.0 | °C | |
| Recommended maximum moisture content | 0.070 | % | |
| Temperature of material cylinder zone 1 | 220 to 240 | °C | |
| Temperature of material cylinder zone 3 | 225 to 245 | °C | |
| Joint temperature | 225 to 245 | °C | |
| Mouth temperature | 225 to 245 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |