Techsil® RTV27905

About
Techsil RTV27905 is one of a family of soft, adherent, clear silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low viscosity, 2 component system that is readily mixed in a 1:1 ratio. RTV27905 is the softest gel in this group of products. It is used to provide protection from vibration, thermal or mechanical shock. RTV27905 has excellent dielectric properties and also gives excellent protection from water and many environmental contaminants. Advantages: The following describes some of the properties offered by RTV27905: Low viscosity Soft but resilient Simple 1:1 ratio mix Excellent pot life and curing characteristics Excellent adhesion to many substrates Flexible down to -55°C Suitable up to +200°C&&

About

Techsil RTV27905 is one of a family of soft, adherent, clear silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low viscosity, 2 component system that is readily mixed in a 1:1 ratio. RTV27905 is the softest gel in this group of products. It is used to provide protection from vibration, thermal or mechanical shock. RTV27905 has excellent dielectric properties and also gives excellent protection from water and many environmental contaminants. Advantages: The following describes some of the properties offered by RTV27905: Low viscosity Soft but resilient Simple 1:1 ratio mix Excellent pot life and curing characteristics Excellent adhesion to many substrates Flexible down to -55°C Suitable up to +200°C&&

Product Description
Generic	硅橡胶,RTV-2
Material Status	Commercial: Active
Features	Low Viscosity,noise reduction,Good bond,Elastic,Low temperature toughness,Soft,Room temperature cure
Availabilitys	Europe

Technical Data
Supplementary information	Nominal value	Unit	Test method
Penetration depth	3.00 to 7.00	mm
volatility	< 0.10	%

Uncured Properties	Nominal value	Unit
Weight Mix Ratio (PBW)
Part A	1.0
Part B	1.0
Volume Mixing Ratio (PBV)
Part A	1.0
Part B	1.0
Density
25℃	0.970	g/cm³
viscosity	1.0	Pa·s
Curing time
150℃	0.50	hr
100℃	1.0	hr
25℃	20	hr
storage stability	45	min

Cured Properties	Nominal value	Unit	Test method
Electrical strength	> 18	kV/mm
Volume resistivity	2.1E+15	ohms·cm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.