About |
---|
Product Description | |
---|---|
Supplier | Lubrizol Advanced Materials |
Material Status | Commercial: Negative |
Features | Mechanical property,Solvent resistance |
Process Methods | Injection Molding,Extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.36 | g/cm³ | ASTM D792 |
Shrinkage rate | 0.4 – 0.8 | % | ASTM D955 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | 55D | ASTM D2240 | |
Flexural Modulus | 19000 | PSi | ASTM D790 |
Tensile Strength | |||
Broken BRK | 8600 | PSi | ASTM D412 |
Tensile Modulus | |||
100% strain elongation | 2500 | PSi | ASTM D412 |
200% strain elongation | 3600 | PSi | ASTM D412 |
300% strain elongation | 6000 | PSi | ASTM D412 |
Elongation at Break | 360 | % | ASTM D412 |
Process Conditions | |||
---|---|---|---|
Extrusion Molded | Nominal value | Unit | Test method |
Injection Molding | Nominal value | Unit | Test method |
Drying Temperature | 95 | ℃ | |
Drying Time | 2 | hr | |
Maximum Moisture Content | ≤0.02 | % | |
Barrel Zone 1 Temperature | 193.3 | ℃ | |
Barrel Zone 2 Temperature | 198.8 | ℃ | |
Barrel Zone 3 Temperature | 204.4 | ℃ | |
Barrel Zone 4 Temperature | 210 | ℃ | |
Adapter Temperature | 215.5 | ℃ | |
Die Temperature | 215.5 | ℃ | |
Drying Temperature | 95 | ℃ | |
Drying Time | 2 | hr | |
Maximum Moisture Content | ≤0.02 | % | |
Rear Temperature Zone 1 | 187.7 | ℃ | |
Front Temperature Zone 3 | 196.1 | ℃ | |
Nozzle temperature | 201.6 | ℃ | |
Melt Temperature | <215.5 | ℃ | |
Mold Temperature | 10 – | ℃ |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |