| About |
|---|
| TEDUR® L 9217-1 S is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Asia Pacific, Europe, or North America. Applications of TEDUR® L 9217-1 S include automotive and lighting applications. Characteristics include: Flame Rated RoHS Compliant Chemical Resistant High Stiffness&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Hydrolysis stability,V-0 |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.97 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 19200 | MPa | ISO 527-2 |
| tensile strength | |||
| fracture | 140 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 1.0 | % | ISO 527-2 |
| Bending modulus | 19100 | MPa | ISO 178 |
| bending strength | 235 | MPa | ISO 178 |
| Bending strain | 1.4 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 6.0 | kJ/m² | ISO 179-1eA |
| Charpy Unnotch Impact strength | 28 | kJ/m² | ISO 179/1eU |
| Notched impact strength of cantilever beam | 25 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 260 | ℃ | ISO 75-2/A |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Compared to the leakage tracing index | 250 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75 mm | V-0 | UL 94 | |
| Glowing wire flammability index | |||
| 2.0 mm | 960 | ℃ | IEC 60695-2-12 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 130 to 140 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Processing (melt) temperature | 320 to 340 | °C | |
| Mold temperature | > 140 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |