TEDUR® L 9404-3.2

About
TEDUR® L 9404-3.2 is a Polyphenylene Sulfide (PPS) product filled with 30% carbon fiber. It is available in Asia Pacific, Europe, or North America. Applications of TEDUR® L 9404-3.2 include automotive and electrical/electronic applications. Characteristics include: Flame Rated RoHS Compliant Conductive High Stiffness&&

Product Description
Supplier	ALBIS
Material Status	Commercial: Active
Features	Good Rigidity,V-0,Conductive
Availabilitys	Asia Pacific,North America,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Flexural Modulus	24500	MPa	ISO 178
Flexural Strength	285	MPa	ISO 178
Flexural Deformation	1.3	%	ISO 178
Tensile Modulus	26500	MPa	ISO 527
Tensile Strength	190	MPa	ISO 527-2
Elongation at Break	0.9	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	29	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature HDT
1.8 MPa	275	℃	ISO 75-1/-2
Melting point	280	℃	ISO 11357

ELECTRICAL	Nominal value	Unit	Test method
Surface Resistivity	100	ohm	IEC 62631-3-2

PHYSICAL	Nominal value	Unit	Test method
Density	1440	kg/m³	ISO 1183

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame Class Rating
0.75 mm	V-0	calss	UL 94
1.5 mm	V-0	calss	UL 94
Glow Wire Flammability Index (GWFI)	PASSED		DIN EN 60695

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Drying Temperature	130 to 140	°C
Drying Time	2.0 to 4.0	hr
Melt Temperature	320 to 340	°C
Mold Temperature	> 140	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.