TEDUR® L 9410-1

About
TEDUR® L 9410-1 is a Polyphenylene Sulfide (PPS) product filled with 45% glassmineral and 15% ptfe fiber. It is available in Asia Pacific, Europe, or North America. Applications of TEDUR® L 9410-1 include automotive and engineering/industrial parts. Characteristics include: Flame Rated RoHS Compliant High Stiffness Warp Resistant Wear Resistant&&

Product Description
Supplier	ALBIS
Generic	PPS
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good wear resistance,V-0
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.89	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	15000	MPa	ISO 527-2
tensile strength	110	MPa	ISO 527-2
Tensile strain
fracture	1.0	%	ISO 527-2
Bending modulus	15000	MPa	ISO 178
bending strength	180	MPa	ISO 178
Bending strain	1.5	%	ISO 178

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	20	kJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	260	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level			UL 94
0.75 mm	V-0		UL 94
1.50 mm	V-0		UL 94
3.00 mm	V-0		UL 94
Glowing wire flammability index
2.0 mm	960	℃	IEC 60695-2-12

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	130 to 140	°C
Drying time	2.0 to 4.0	hr
Processing (melt) temperature	320 to 340	°C
Mold temperature	> 140	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.