TEDUR® L 9560-3 S

About
TEDUR® L 9560-3 S is a Polyphenylene Sulfide (PPS) product filled with 10% glass fiber and 40% mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Reflectors. Characteristics include: Flame Rated RoHS Compliant Good Aesthetics Heat Stabilizer&&

Product Description
Supplier	ALBIS
Generic	PPS
Material Status	Commercial: Active
Features	Good surface appearance,Electroplating,Heat Stabilized,V-0
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.81	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	11000	MPa	ISO 527-2
tensile strength
fracture	100	MPa	ISO 527-2
Tensile strain
fracture	1.2	%	ISO 527-2
Bending modulus	10000	MPa	ISO 178
bending strength	140	MPa	ISO 178
Bending strain	1.5	%	ISO 178

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	18	kJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	250	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level			UL 94
0.75 mm	V-0		UL 94
1.50 mm	V-0		UL 94
3.00 mm	V-0		UL 94
Glowing wire flammability index
2.0 mm	960	℃	IEC 60695-2-12

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	130 to 140	°C
Drying time	2.0 to 4.0	hr
Processing (melt) temperature	320 to 340	°C
Mold temperature	> 140	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.