| About |
|---|
| Product Description | |
|---|---|
| Supplier | Chemours |
| Generic | FEP |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good Electrical Properties,Good liquidity,Solvent resistance,Heat Stabilized |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Water absorption rate | |||
| 24hr | <0.01 | % | ASTM D570 |
| Melt Flow Rate | |||
| 372℃，5.0kg | 30 | g/10min | ISO 12086 |
| Density | 2.15 | ISO 1183 | |
| Critical shear rate (372 ℃) | 200 | 1/s | Chemours |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 55 | ISO 868 | |
| tensile strength | |||
| 23℃ | 20 | MPa | ISO 12086 |
| Tensile strain | |||
| Fracture, 23 ℃ | 300 | % | ISO 12086 |
| Bending modulus | |||
| 23℃ | 520 | MPa | ISO 178 |
| Flexural strength | |||
| 0.20 mm | 7000 | Cycles | ASTM D2176 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 255 | ℃ | ASTM D4591 |
| Extreme oxygen index | > 95 | % | ISO 4589 |
| Flammability classification | V-0 | – | UL 94 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1.00 GHz | 2.03 | IEC 250 | |
| 1 MHz | 2.03 | IEC 250 | |
| Dissipation factor | |||
| 1 GHz | 0.0004 | IEC 250 | |
| 1 MHz | 0.0006 | IEC 250 | |
| Dielectric strength | |||
| 0.25 mm | 80 | kV/mm | IEC 243 |
| Chemical properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Climate and chemical resistance | 优良 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |