Teflon® FEP 9898

About

Product Description
Supplier	Chemours
Material Status	Commercial: Active
Features	Good Electrical Properties,Good flexibility,High Heat Resistance,Solvent resistance,No viscosity,Heat Stabilized,Weather resistance is good,Good liquidity
Availabilitys	Latin America,North America,Europe,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
372℃，5.0kg	30	g/10min	ISO 12086
Density	2.15		ISO 1183
Critical Shear Rate (372 ℃)	200	1/s	Chemours
Water Absorption
24h	<0.01	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Shore hardness	55	D 级	ISO 868
Tensile Strength
23℃	20	MPa	ISO 12086
Tensile Strain
Fracture, 23 ℃	300	%	ISO 12086
Flexural Modulus
23℃	520	MPa	ISO 178

0.20 mm	7000	Cycles	D 2176 2

THERMAL	Nominal value	Unit	Test method
Melting point	255	℃	D 4591
Oxygen Index	> 95	%	ISO 4589
Flammability classification 3, 4	V-0	–	UL 94

ELECTRICAL	Nominal value	Unit	Test method
Dielectric Constant
1.00 GHz	2.03		IEC 250
1 MHz	2.03		IEC 250
Dissipation Factor
10 GHz	< 0.0004		IEC 250
1 GHz	0.0004		IEC 250
1 MHz	0.0006		IEC 250
Dielectric Strength
0.25 mm	80	kV/mm	IEC 243

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.