Teflon® FFR 550

About
DuPont™ Teflon® FFR 550 is fluoropolymer compounded with a nucleating package. The nucleating package in this resin, when combined with nitrogen gas injection, forms uniform foam cells in the insulation.&&

Product Description
Supplier	Chemours
Generic	含氟聚合物
Material Status	Commercial: Active
Features	Foaming performance,Nucleation
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.13	g/cm³	ASTM D792
Melt Flow Rate	14	g/10min	ASTM D2116

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	260	℃	ASTM D3418

Electrical performance	Nominal value	Test method
Dielectric constant		ASTM D2520
100 kHz	2.05	ASTM D2520
1 MHz	2.03	ASTM D2520
600 MHz	2.00	ASTM D2520

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.