Teflon® PTFE 60 X

About
DuPont™ Teflon® PTFE 60 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon® PTFE 60 X offers the excellent combination of properties typical of the Teflon® fluoroplastic resins: chemical inertness to nearly all industrial chemicals and solvents superior in-use thermal stability (low thermal instability index) exceptional dielectric properties, stable with frequency and temperature toughness and flexibility low coefficient of friction non-stick characteristics negligible moisture absorption excellent weather resistance service temperature up to 260 °C (500 °F) useful properties at -240 °C (-400 °F) moderate stiffness and high ultimate elongation Teflon® PTFE 60 X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is designed to facilitate the production of high-quality, low-density tape and beading. Teflon® PTFE 60 X meets the requirements of ASTM D 4895-10, Type I, Grade 2, Class A.&&

About

DuPont™ Teflon® PTFE 60 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon® PTFE 60 X offers the excellent combination of properties typical of the Teflon® fluoroplastic resins: chemical inertness to nearly all industrial chemicals and solvents superior in-use thermal stability (low thermal instability index) exceptional dielectric properties, stable with frequency and temperature toughness and flexibility low coefficient of friction non-stick characteristics negligible moisture absorption excellent weather resistance service temperature up to 260 °C (500 °F) useful properties at -240 °C (-400 °F) moderate stiffness and high ultimate elongation Teflon® PTFE 60 X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is designed to facilitate the production of high-quality, low-density tape and beading. Teflon® PTFE 60 X meets the requirements of ASTM D 4895-10, Type I, Grade 2, Class A.&&

Product Description
Supplier	Chemours
Generic	PTFE
Material Status	Commercial: Active
Features	Conductive
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.18	g/cm³	ASTM D4894 , ISO 12086
Apparent density	0.50	g/cm³	ASTM D4894 , ISO 12086
Average particle size
—	500	µm	ASTM D4894
—	500	µm	ISO 12086

THERMAL	Nominal value	Unit	Test method
Melting temperature			ASTM D4894 , ISO 12086
—	327	℃	ASTM D4894，ISO 12086
—	342	℃	ASTM D4894，ISO 12086
Thermal instability index
—	< 50.0		ASTM D4894
—	< 50.0		ISO 12086

Notes
1. Typical properties: these are not to be construed as specifications.
2. Second
3. Initial
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.