Teflon® PTFE 640XT X

About
DuPont ™ Teflon ® PTFE 640XT X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE 640XT X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: non-aging characteristics; chemical inertness to nearly all industrial chemicals and solvents; exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility; low coefficient of friction; non-stick characteristics; negligible moisture absorption; excellent weather resistance; service temperature up to 260°C (500°F); useful properties at -240 °C (-400 °F); Teflon ® PTFE 640XT X is designed for processing over a wide extrusion reduction ratio range (250:1 to 5000:1), with excellent performance even at the top of this range. Due to its outstanding transformation characteristics, Teflon ® PTFE 640XT X can be extruded with very low lubricant levels over a wide reduction ratio range, while the extrusion pressure remains low. For example, Teflon ® PTFE 640XT X can be extruded into wire with excellent performance in the reduction ratio range of 1000:1 to 4500:1 with a single lubricant level of 16% (based on total weight). This means that a single PTFE/lubricant mixture can be used for many constructions being manufactured in the same size extruder line. In addition, the excellent high reduction ratio performance means that products made in small-bore machines with other lower reduction ratio rated fine powders can now be extruded in larger ones, which represent a considerable economic advantage, since more material can be extruded per extrusion. This also means that longer lengths of wire or tubing can be achieved in one extrusion. Teflon ® PTFE 640XT X meets the requirements of ASTM D 4895-10, Type I, Grade 1, Class C. Typical Applications Teflon ® PTFE 640XT X is mainly used for insulation of high-performance wire and cables, as well as tubing. It is also suitable for other typical applications such as additives where some properties of PTFE are required.&&

Product Description
SupplierChemours
GenericPTFE
Material StatusCommercial: Active
FeaturesWeather resistance is good,Good flexibility,Good Electrical Properties,Low coefficient of friction,Food contact compliance,Solvent resistance,Low moisture absorption
AvailabilitysNorth America,Latin America,Asia Pacific,Europe
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density2.16g/cm³ASTM D4895 , ISO 12086
Apparent density0.50g/cm³ASTM D4895 , ISO 12086
Average particle size 
450µmASTM D4895
450µmISO 12086

THERMALNominal valueUnitTest method
Melting temperature ASTM D4591 , ISO 12086
326ASTM D4591,ISO 12086
344ASTM D4591,ISO 12086
Thermal instability index 
< 15.0 ASTM D4895
< 15.0 ISO 12086

Supplementary informationNominal valueUnitTest method
Extrusion pressure 
at RR = 1600:122.0MPaASTM D4895
at RR = 1600:122.0MPaISO 12086
at RR = 2500:128.0MPaASTM D4895
at RR = 2500:128.0MPaISO 12086

Notes
1. Typical properties: these are not to be construed as specifications.
2. Second
3. Initial
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.