Teflon® PTFE 807N X

About
Teflon ® PTFE 807N X is a free flowing PTFE granular resin designed for compression or automatic molding and ram extrusion (low back pressure). It offers an excellent combination of properties that are characteristic of Teflon ® fluoropolymer resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible water absorption, excellent weather resistance. Teflon ® PTFE 807N X is a multi-purpose PTFE resin which yields high productivity due to its high fill density. It is easy to process, handle and machine. It also has excellent end-use properties. Typical Applications Can be fabricated into billets for skived tape, basic shapes and moldings. It can be used for applications such as: seals, valve seats, bearing pads, linings, gaskets, electrical/electronic parts.&&

About

Teflon ® PTFE 807N X is a free flowing PTFE granular resin designed for compression or automatic molding and ram extrusion (low back pressure). It offers an excellent combination of properties that are characteristic of Teflon ® fluoropolymer resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible water absorption, excellent weather resistance. Teflon ® PTFE 807N X is a multi-purpose PTFE resin which yields high productivity due to its high fill density. It is easy to process, handle and machine. It also has excellent end-use properties. Typical Applications Can be fabricated into billets for skived tape, basic shapes and moldings. It can be used for applications such as: seals, valve seats, bearing pads, linings, gaskets, electrical/electronic parts.&&

Product Description
Supplier	Chemours
Generic	PTFE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good flexibility,Good Electrical Properties,Low coefficient of friction,Machinable,Food contact compliance,Heat Resistance, Good,Solvent resistance,Low moisture absorption
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.16	g/cm³	ASTM D4894
Apparent density	0.90	g/cm³	ASTM D4894
Average particle size	550	µm	ASTM D4894
moisture content	<0.040	%	ASTM D4894

Notes
1. Typical properties: these are not to be construed as specifications.
2. Measured on skived tapes
3. Second
4. Initial
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.