Teflon® PTFE CFP 6000 X

About
DuPont™ Teflon ® PTFE CFP 6000 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE CFP 6000 X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: chemical inertness to nearly all industrial chemicals and solvents superior in-use thermal stability (low thermal instability index) exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility low coefficient of friction non-stick characteristics negligible moisture absorption excellent weather resistance service temperature up to 260°C (500°F) useful properties at -240 °C (-400 °F) moderate stiffness and high ultimate elongation Teflon ® PTFE CFP 6000 X is esigned for processing at medium to high reduction ratios (250:1 to 3000:1). It is particularly suitable for production of wire coating, wire jacketing and tubing at fast sintering rates with superior thermal stability in use. Teflon ® PTFE CFP 6000 X meets the requirements of ASTM D4895-10,Type I, Grade 3, Class C. Typical Applications Teflon ® PTFE CFP 6000 X is designed for use as wire & cable insulation and small diameter, thin wall tubing.&&

About

DuPont™ Teflon ® PTFE CFP 6000 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE CFP 6000 X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: chemical inertness to nearly all industrial chemicals and solvents superior in-use thermal stability (low thermal instability index) exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility low coefficient of friction non-stick characteristics negligible moisture absorption excellent weather resistance service temperature up to 260°C (500°F) useful properties at -240 °C (-400 °F) moderate stiffness and high ultimate elongation Teflon ® PTFE CFP 6000 X is esigned for processing at medium to high reduction ratios (250:1 to 3000:1). It is particularly suitable for production of wire coating, wire jacketing and tubing at fast sintering rates with superior thermal stability in use. Teflon ® PTFE CFP 6000 X meets the requirements of ASTM D4895-10,Type I, Grade 3, Class C. Typical Applications Teflon ® PTFE CFP 6000 X is designed for use as wire & cable insulation and small diameter, thin wall tubing.&&

Product Description
Supplier	Chemours
Generic	PTFE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,Good Electrical Properties,Low coefficient of friction,Food contact compliance,Good Tensile Strength,Solvent resistance,Low moisture absorption,Heat Stabilized
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.18	g/cm³	ASTM D4895 , ISO 12086
Apparent density	0.46	g/cm³	ASTM D4895 , ISO 12086
Average particle size
—	520	µm	ASTM D4895
—	520	µm	ISO 12086

THERMAL	Nominal value	Unit	Test method
Melting temperature			ASTM D4895 , ISO 12086
—	325	℃	ASTM D4895，ISO 12086
—	342	℃	ASTM D4895，ISO 12086
Thermal instability index
—	< 15.0		ASTM D4895
—	< 15.0		ISO 12086

Supplementary information	Nominal value	Unit	Test method
Extrusion pressure – at RR=1600:1
—	41.4	MPa	ASTM D4895
—	41.4	MPa	ISO 12086

Notes
1. Typical properties: these are not to be construed as specifications.
2. Second
3. Initial
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.