Tefzel® HT-2160

About
DuPont™ Tefzel ® fluoropolymer HT-2160 resin combines the chemical and high-temperature resistance of Tefzel ® with antistatic levels of electrical conductivity. Tefzel ® HT-2160 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared to other fluoropolymer resins. They are mechanically tough and offer an excellent balance of properties. Tefzel ® HT-2160 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems. Properly processed products made from virgin Tefzel ® HT-2160 are inert to most solvents and chemicals, hydrolytically stable, and weather resistant. The recommended upper service temperature is 150°C (302°F); useful properties are retained at cryogenic ranges. Mechanical properties include outstanding impact strength and cut-through and abrasion resistance. Typical End Products Tefzel ® HT-2160 resin can be used to manufacture extruded tubing, pipe, and other profiles for hose; linings of components used in the chemical processing industries; industrial film; injection and blow-molded articles requiring superior electrical, chemical, and thermal properties.&&

About

DuPont™ Tefzel ® fluoropolymer HT-2160 resin combines the chemical and high-temperature resistance of Tefzel ® with antistatic levels of electrical conductivity. Tefzel ® HT-2160 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared to other fluoropolymer resins. They are mechanically tough and offer an excellent balance of properties. Tefzel ® HT-2160 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems. Properly processed products made from virgin Tefzel ® HT-2160 are inert to most solvents and chemicals, hydrolytically stable, and weather resistant. The recommended upper service temperature is 150°C (302°F); useful properties are retained at cryogenic ranges. Mechanical properties include outstanding impact strength and cut-through and abrasion resistance. Typical End Products Tefzel ® HT-2160 resin can be used to manufacture extruded tubing, pipe, and other profiles for hose; linings of components used in the chemical processing industries; industrial film; injection and blow-molded articles requiring superior electrical, chemical, and thermal properties.&&

Product Description
Supplier	Chemours
Generic	ETFE
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,High impact resistance,Conductive,Hydrolysis stability,Copolymer,Good wear resistance,Solvent resistance
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.70	g/cm³	ASTM D792
Melt Flow Rate
297℃，5.0kg	2.3	g/10min	ASTM D3159

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	34.5	MPa	ASTM D3159
Tensile strain
Fracture, 23 ℃	200	%	ASTM D3159

THERMAL	Nominal value	Unit	Test method
Melting temperature	255 to 280	℃	ASTM D3159
Maximum operating temperature	150	℃	UL 746

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	7.0	ohms·cm	ASTM D257

Notes
1. Typical properties: these are not to be construed as specifications.
2. Volume resistivity as measured on compression molded plaques. Resistivity is very sensitive to processing technique. Injection molded plaques are typically higher.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.