| About |
|---|
| A pharmaceutical-grade PE/PCTFE flexible film, unconventionally bonded, is specially developed to contain demanding liquids. The film is a high barrier, transparent, radiation sterilization stable, non-yellowing, thermoformable and EP- and FDA-compliant film. The product contact layer is a polyethylene without additives for containers for parenteral and ophtalmic preparations, with a low extractables profile. PCTFE offers the high barrier to moisture and to aromatic and aliphatic hydrocarbon species and excipients.&& |
| Product Description | |
|---|---|
| Generic | PE+PCTFE |
| Material Status | Commercial: Active |
| Features | Low extract,Good flexibility,Retention of aroma ,Moisture resistance,Radiation disinfection |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.23 | g/cm³ | |
| dimensional stability | |||
| 140℃ | -6.0 to 6.0 | % | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | 60.0 | µm | |
| tensile strength | |||
| MD, yield | 20.3 | MPa | |
| Oxygen transfer rate | |||
| 23℃，100% RH | 25 | cm³/m²/24 hr | |
| Water vapor transmittance | |||
| 38℃，90% RH | 0.39 | g/m²/24 hr | |
| dosage | 12.2 to 15.0 | m²/kg |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | < 10 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Roll Width | < 110.00 | cm | |
| Temperature of hot forming mold | 105 to 120 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 30 minutes |
| 3. Thickness tolerance: ±10% |
| 4. Roll width tolerance: ±1.5 mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |