Telcar® GS5073A

About
Telcar® GS5073A is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific for extrusion or injection molding. Typical applications include: Engineering/Industrial Parts Handles Business/Office Goods Consumer Goods Containers&&

Product Description
Supplier	Teknor Apex
Generic	TPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	25	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 10 seconds	52		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
fracture	3.50	MPa	ASTM D412
100% strain	2.00	MPa	ASTM D412
300% strain	2.50	MPa	ASTM D412
Tensile strain
fracture	550	%	ASTM D412

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	40 to 80	°C
Barrel rear temperature	180 to 250	°C
Barrel middle temperature	180 to 250	°C
Barrel front temperature	180 to 250	°C
Mold temperature	40 to 60	°C
Injection pressure	10.3 to 138	MPa
Drying temperature	40 to 80	°C
Barrel 1 zone temperature	170 to 230	°C
Barrel 2 zone temperature	170 to 230	°C
Barrel 3 zone temperature	170 to 230	°C
Barrel 4 zone temperature	170 to 230	°C
Barrel 5 zone temperature	170 to 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.