Telcar® GS7033

About
Telcar® GS7033 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific.&&

Product Description
Supplier	Teknor Apex
Generic	TPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.888	g/cm³	ASTM D792
Melt Flow Rate
200℃，2.16kg	15	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 10 seconds	69		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	7.00	MPa	ASTM D412
100% strain	4.00	MPa	ASTM D412
300% strain	5.00	MPa	ASTM D412
Tensile strain
fracture	650	%	ASTM D412

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.