| About |
|---|
| Telcar TL-2363T is a UV resistant thermoplastic elastomer designed for outdoor applications requiring a soft, rubber-like feel. Telcar TL-2363T is a high hardness grade that exhibits excellent abrasion resistance, suitable for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Smoothness,High liquidity,Ultraviolet absorption,Good Hardness,Flame Characteristics,Lubricating,Ablation resistance,Bromination |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.02 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| TD, 100% strain | 6.05 | MPa | ASTM D412 |
| MD, 100% strain | 8.13 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| TD, 300% strain | 7.29 | MPa | ASTM D412 |
| MD, 300% strain | 9.54 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| fracture | 9.87 | MPa | ASTM D412 |
| MD, fracture | 12.5 | MPa | ASTM D412 |
| Tensile strain | ASTM D412 | ||
| fracture | 520 | % | ASTM D412 |
| Flow rate, fracture | 550 | % | ASTM D412 |
| tear strength | ASTM D624 | ||
| TD | 46.8 | kN/m | ASTM D624 |
| MD | 57.6 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395B | ||
| 23℃，22 hr | 44 | % | ASTM D395B |
| 70℃，22 hr | 85 | % | ASTM D395B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 90 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 88 | ASTM D2240 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 20 | % | ASTM D2863 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 171 to 193 | °C | |
| Barrel middle temperature | 177 to 199 | °C | |
| Barrel front temperature | 182 to 204 | °C | |
| Nozzle temperature | 188 to 210 | °C | |
| Processing (melt) temperature | 188 to 210 | °C | |
| Mold temperature | 25 to 66 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Injection speed | Moderate-Fast | ||
| Back pressure | 0.172 to 0.345 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 166 to 188 | °C | |
| Barrel 2 zone temperature | 171 to 193 | °C | |
| Barrel 3 zone temperature | 177 to 199 | °C | |
| Barrel 5 zone temperature | 182 to 204 | °C | |
| Nozzle temperature | 190 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |