| About |
|---|
| Typical Applications Used for the production of injection molding products requiring a good resistance to long term heat exposure, especially for battery cases, automotive components and large containers Automotive compounding applications Key Characteristics Medium fluidity Good balance of impact and stiffness Low warpage tendency Good heat aging resistance Good dimensional stability Formulated with a highly effective heat stabilization package Food contact approval for specific applications (refer to NATPET)&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Low warping,Good heat aging resistance,Good Dimensional Stability,Food contact compliance,Moderate liquidity,Impact copolymer,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1200 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 27.0 | MPa | ISO 527-2/50 |
| Tensile strain | ISO 527-2/50 | ||
| yield | 7.0 | % | ISO 527-2/50 |
| fracture | > 50 | % | ISO 527-2/50 |
| Bending modulus | 1100 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1e | ||
| -20℃ | 3.5 | kJ/m² | ISO 179/1e |
| 0℃ | 4.5 | kJ/m² | ISO 179/1e |
| 23℃ | 7.5 | kJ/m² | ISO 179/1e |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -20℃ | 80 | kJ/m² | ISO 179/1eU |
| 0℃ | 140 | kJ/m² | ISO 179/1eU |
| 23℃ | 无断裂 | ISO 179/1eU | |
| Impact strength of cantilever beam notch | |||
| 23℃ | 5.4 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 148 | ℃ | ISO 306/A50 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 1000 µm | 6.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |