Teldene® H12ML

About
Typical Applications Used for the production of furniture, crates, containers, caps and closures General purpose injection molding application Key Characteristics Good flow properties, High Stiffness Food contact approval for specific applications (refer to NATPET)&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good liquidity,Food contact compliance,Homopolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	12	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1550	MPa	ISO 527-1-2
tensile strength			ISO 527-2/50
yield	35.0	MPa	ISO 527-2/50
fracture	26.0	MPa	ISO 527-2/50
Tensile strain			ISO 527-2/50
yield	13	%	ISO 527-2/50
fracture	> 50	%	ISO 527-2/50
Bending modulus	1500	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	3.9	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	91.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	152	℃	ISO 306/A50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	240 to 260	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.