TEREZ PA 6 7500 GFN 30

About
Medium viscosity Polyamide 6, 30% glass fiber reinforced, nanomodified. For moulding parts with high stiffness and good impact resistance.&&

Product Description
Supplier	TER
Generic	PA6
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	9900	MPa	ISO 527-2
tensile strength
yield	180	MPa	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	64	kJ/m²	ISO 179/1eU

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.