| About |
|---|
| Product Description | |
|---|---|
| Supplier | INEOS |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Moderate liquidity,Good surface appearance |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | |||
| 220℃，10 kg | 24 | cm³/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 18 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| B50,50N，50℃/h | 90 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| Yield, 23 ℃ | 36 | MPa | ISO 527 |
| Fracture, 23 ℃ | 30 | MPa | ISO 527 |
| Tensile strain | |||
| Yield, 23 ℃ | 3.6 | MPa | ISO 527 |
| Fracture, 23 ℃ | 10 | MPa | ISO 527 |
| Tensile modulus | 2000 | MPa | ISO 527 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| Melting temperature | 220-260 | ℃ | ISO 294 |
| Mold temperature | 30-80 | ℃ | ISO 294 |
| drying temperature | 80 | ℃ | |
| Drying time | 2 – 4 | h | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |