| About |
|---|
| TERRAMAC HV-6250H is a Polylactic Acid (PLA) material. It is available in Asia Pacific, Europe, or North America for foam processing, press molding, or vacuum forming. Primary attribute of TERRAMAC HV-6250H: Eco-Friendly/Green. Typical applications include: Business/Office Goods Consumer Goods Containers Electrical/Electronic Applications Foam&& |
| Product Description | |
|---|---|
| Supplier | UNITIKA |
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Renewable resources,Foaming performance,Biodegradable |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ISO 1183 |
| Shrinkage rate | 1.0 to 3.0 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 69.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 2.0 | % | ISO 527-2 |
| Bending modulus | 4700 | MPa | ISO 178 |
| bending strength | 111 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 1.9 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 120 | ℃ | ISO 75-2/B |
| Melting temperature | 170 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 180 to 200 | °C | |
| Barrel 2 zone temperature | 190 to 230 | °C | |
| Barrel 3 zone temperature | 190 to 220 | °C | |
| Nozzle temperature | 150 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |