TERRAMAC TE-2000

About
TERRAMAC TE-2000 is a Polylactic Acid (PLA) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of TERRAMAC TE-2000: Eco-Friendly/Green. Typical applications include: Business/Office Goods Consumer Goods Containers Electrical/Electronic Applications Trays/Racks&&

Product Description
Supplier	UNITIKA
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³	ISO 1183
Shrinkage rate	0.30 to 0.50	%	ISO 294-4

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	63.0	MPa	ISO 527-2
Tensile strain
fracture	4.0	%	ISO 527-2
Bending modulus	4300	MPa	ISO 178
bending strength	106	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	1.6	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	58.0	℃	ISO 75-2/B
Melting temperature	170	℃

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	130 to 170	°C
Barrel middle temperature	180 to 220	°C
Barrel front temperature	180 to 220	°C
Nozzle temperature	180 to 220	°C
Processing (melt) temperature	< 240	°C
Mold temperature	10 to 30	°C
Back pressure	0.490 to 1.47	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.