Terratek® BD4015

About
Terratek® BD resins are a proprietary blend of natural and synthetic biodegradable polymers. The resins are made with ingredients which pass industry standards for composting. By altering the ratio of the natural to synthetic biodegradable polymers, a wide range of properties can be generated.&&

Product Description
Generic	生物可降解聚合物
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,Compostable
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.30	g/cm³
Apparent density	0.83	g/cm³
Melt Flow Rate
190℃，2.06kg	8.8	g/10min
humidity	< 1.0	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	18.6	MPa

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	50	J/m

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	93	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.10	%
Barrel rear temperature	166 to 177	°C
Barrel middle temperature	171 to 182	°C
Barrel front temperature	171 to 182	°C
Nozzle temperature	171 to 182	°C
Processing (melt) temperature	< 204	°C
Mold temperature	16 to 49	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.