| About |
|---|
| Texalan 7 Series PCL TPU Texalan® 7 series are PCL based TPU, which are with good abrasion resistance, tensile strength, oil resistance and heat resistance which can be used in mechanic parts and various industry parts.&& |
| Product Description | |
|---|---|
| Supplier | Austin |
| Generic | 其他TPU合金 |
| Material Status | Commercial: Active |
| Features | High impact resistance,High elastic,Antifreeze,Good Tensile Strength,Good wear resistance,Grease resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 to 1.22 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 37 | ||
| yield | > 43.0 | MPa | ISO 37 |
| 100% strain | > 9.00 | MPa | ISO 37 |
| 300% strain | > 20.0 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | > 450 | % | ISO 37 |
| tear strength | > 90 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 70℃ | < 25 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 92 to 98 | ISO 7619 | |
| abrasion resistance | < 50.0 | mm³ | ISO 4649 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |